Laser Marking Machine 50w 3d - Desktop Fiber Laser Marking Machine – Gold Mark

Product Detail

Working principle The laser beam from the laser (through the beam expander mirror) enters the marking head, and after the reflection of the scanning oscillator 1 and scanning oscillator 2 reaches the f-Theta flat field lens, through which the lens is focused to form a high energy spot (15-20μ) with a small area. The scanning oscillator is driven by a highly sensitive detector-type motor, and the computer control system controls these two motors to deflect at a certain angle, while controlling the laser beam off and on, finally marking the required symbols and patterns on the workpiece. Product features 1.It can process a variety of metal and non-metal materials. Especially for high hardness, high melting point and brittle materials, the marking is more advantageous. 2.Non-contact processing, no damage to the product, no tool wear, and good marking quality. 3.The laser beam is fine, the processing material consumption is small, and the processing heat affected zone is small. 4.High processing efficiency, computer control, and easy automation. Product parameters

Model NO.	TS2020
Power	20W/30W/50W
Laser Brand	Raycus (Maxphotonics/IPG Optional)
Marking Area	110mm*110mm
Optional Marking Area	110mm110mm / 150mm150mm /200mm*200mm
Marking Depth	≤0.5mm
Marking Speed	≤7000mm/s
Minimum Line Width	0.012mm
Minimum Character	0.15mm
Repeated Precision	±0.003mm
Life-span of Fiber Laser Module	100 000hours
Beam Quality	M2 <1.5
Focus Spot Diameter	<0.01mm
Output Power of Laser	10%~100% continuously to be adjusted
System Operation Environment	Windows XP / W7--32/64bits / W8--32/64bits
Cooling Mode	Air cooling--Built-in
Temperature of Operation Environment	15℃~35℃
Power Input	220V / 50HZ / single phase or 110V / 60HZ / single phase
Power Requirement	<400W
Communication Interface	USB
Package Dimension	9407901550mm
Net Weight/gross weight	120KG/170KG
Optional (Not free of charge)	Rotary Device, Moving Table, other customized Automation